亚洲国产精品第一区二区|人人人人澡|操大姨姐|免费视频久久看|欧美国产激情二区三区

 內容編輯

Tefzel HT-2202
乙烯四氟乙烯共聚物
DuPont Fluoropolymers

產品說明

DuPont™ Tefzel® HT-2202 fluoropolymer is a special-purpose resin available in 2.5-mm (0.1-in.) pellets. Tefzel® HT-2202 is a modified ETFE resin designed to promote adhesion between polyamide resins and ETFE resins.

Tefzel® HT-2202 and the other Tefzel® fluoropolymers are melt processible, modified copolymers of ethylene and tetrafluoroethylene. They are high-performance resins that can be processed at relatively high rates compared with fluorocarbon resins. They are mechanically tough and offer an excellent balance of properties.

Tefzel® HT-2202 is an easy-to-process adhesive material. Tefzel® HT-2202 is inert to most solvents and chemicals, hydrolytically stable, and weather resistant. Recommended upper service is 150°C (302°F); useful properties are retained at cryogenic ranges. The level and stability of dielectric properties are excellent. Mechanical properties include outstanding high-impact strength, cut-through, and abrasion resistance.

總體

材料狀態 • 已商用：當前有效   
供貨地區 • 北美洲 • 歐洲  
 • 南美洲 • 亞太地區  
    
 • 抗溶解性 • 耐磨蝕性，良好 • 水解穩定 
性能特點 • 抗撞擊性，高 • 耐氣候影響性能良好  
 • 耐化學性良好 • 韌性良好  
用途 • 電氣/電子應用領域 • 緊固件 • 容器 
 • 閥門/閥門部件 • 連接器 • 實驗室器具 
    
形式 • 顆粒料   
加工方法 • 吹塑成型 • 樹脂傳遞成型 • 注射成型 
 • 擠出 • 壓縮模塑  
    
    
物理性能  額定值單位制 測試方法 
比重  1.70g/cm³ ASTM D792 
熔流率 (297°C/5.0 kg)  7.0g/10 min ASTM D1238 
吸水率 (24 hr)  0.0070% ASTM D570 
機械性能  額定值單位制 測試方法 
抗張強度 (23°C)  34.5MPa ASTM D638 
伸長率 (斷裂, 23°C)  250% ASTM D638 
彎曲模量 (23°C)  1030MPa ASTM D790 
沖擊性能  額定值單位制 測試方法 
懸壁梁缺口沖擊強度 (23°C)  無斷裂 ASTM D256 
熱性能  額定值單位制  
熔融溫度  250 到 280°C  
可燃性  額定值單位制 測試方法 
極限氧指數  31% ASTM D2863 
補充信息    
Limiting Oxygen Index, ASTM D2863: 30 to 32%