亚洲国产精品第一区二区|人人人人澡|操大姨姐|免费视频久久看|欧美国产激情二区三区

 內容編輯

Teflon® PFA 940 HP Plus
全氟烷氧基
DuPont Fluoropolymers

產品說明

DuPont™ Teflon® PFA HP Plus fluoropolymer is a special purpose resin available in clear, 2.5-mm (0.1 in) pellets. This resin is similar to PFA HP with the additional benefits of improved flex life and chemical stress crack resistance. Teflon® PFA HP Plus meets the increasingly stringent requirements for ultra-reliable and non-contaminating parts, while retaining the same exceptional chemical resistance, high purity and protection against ionic contamination as PFA HP. The improved flex life and chemical resistance will reduce the cost of ownership of high purity fluid handling systems by reducing downtime caused by mechanical or chemical stresses. Parts molded with Teflon® PFA HP Plus have improved clarity and a smooth finish, which can further help prevent buildup of microbial contamination in water handling systems.

The exceptional purity of Teflon® PFA HP Plus makes it suitable for applications that require low extractable fluorides, and freedom from other foreign materials. This product contains no additives and is designed for hostile chemical environments where purity in the parts-per-billion range is needed. An example is in fluid handling systems for the manufacture of semiconductors. Teflon® PFA HP Plus is preferred when extended service is required in hostile environments involving chemical, thermal, and mechanical stress.

The excellent thermal stability of Teflon® PFA HP Plus results in better moldings and reduces metal pickup from processing equipment. Teflon® PFA HP Plus combines the processing ease of conventional thermoplastics with the properties similar to those of polytetrafluoroethylene.

Properly processed products made from Teflon® PFA HP Plus resin provide the superior properties typical of fluoropolymer resins; retention of properties after service at 250°C (482°F), useful properties at -196°C (-320°F), and chemical inertness to nearly all industrial chemicals and solvents. Dielectric properties are excellent. Molded products have moderate stiffness and high ultimate elongation.

In a flame situation, products of Teflon® PFA HP Plus resist ignition and do not themselves promote flame spread. When ignited by flame from other sources, their contribution to heat is very small and added at a slow rate with very little smoke.

總體

材料狀態 • 已商用：當前有效   
供貨地區 • 北美洲 • 歐洲  
 • 南美洲 • 亞太地區  
    
 • 剛性，良好 • 耐化學性良好 • 延展性，高 
性能特點 • 高 ESCR（抗應力裂紋） • 熱穩定性，良好  
 • 抗溶解性 • 煙釋放，低  
用途 • 襯里 • 管道 • 零件裝置 
 • 閥門/閥門部件 • 管道系統  
    
外觀 • 清晰/透明   
形式 • 顆粒料   
加工方法 • 吹塑成型 • 擠出 • 壓縮模塑 
 • 管路擠壓成型 • 樹脂傳遞成型 • 注射成型 
    
    
物理性能  額定值單位制 測試方法 
比重  2.14g/cm³ ASTM D792 
熔流率 (372°C/5.0 kg)  17g/10 min ASTM D1238 
吸水率 (24 hr)  0.050% ASTM D570 
機械性能  額定值單位制 測試方法 
抗張強度   ASTM D638 
屈服, 23°C  13.8MPa  
23°C  28.3MPa  
200°C  11.0MPa  
伸長率   ASTM D638 
斷裂, 23°C  310%  
斷裂, 200°C  450%  
彎曲模量   ASTM D790 
23°C  648MPa  
200°C  60.0MPa  
硬度  額定值單位制 測試方法 
硬度計硬度 (邵氏 D)  55 ASTM D2240 
熱性能  額定值單位制 測試方法 
熔融溫度  285 到 300°C  
線形膨脹系數 - 流動   ASTM D696 
0 到 100°C  0.00015cm/cm/°C  
100 到 150°C  0.00023cm/cm/°C  
150 到 200°C  0.00029cm/cm/°C  
    
  
   
   
  
   
 
Teflon® PFA 940 HP Plus  2012年9月30日
全氟烷氧基  
DuPont Fluoropolymers  
電氣性能 額定值單位制 測試方法
體積電阻率 1.0E+18ohm•cm ASTM D257
介電強度 2 (0.254 mm) 79kV/mm ASTM D149
介電常數  ASTM D150
100 Hz 2.05 
10 MHz 2.05 
耗散因數  ASTM D150
100 Hz 0.00030 
10 MHz 0.00030 
可燃性 額定值單位制 測試方法
極限氧指數 95% ASTM D2863