亚洲国产精品第一区二区|人人人人澡|操大姨姐|免费视频久久看|欧美国产激情二区三区

 內容編輯

Rulon XL
聚四氟乙烯
Saint Gobain Performance Plastics

產品說明

Rulon® XL is a tan colored material that is best for use against aluminum (including anodized) substrates. Rulon® XL exhibits very low wear as compared with other Rulon® grades.

Other advantages offered by this unique material are that it combines low deformation under load with exceptionally good chemical resistance.

It is compatible with a wide range of mating surfaces, but is not recommended for use with alkalis. Its non-abrasive character enhances the frictional performance to prevent galling of softer mating surfaces.

It is the best material for vacuum service.    
總體    
材料狀態 • 已商用：當前有效   
供貨地區 • 北美洲   
性能特點 • 尺寸穩定性良好 • 耐磨蝕性，良好  
 • 耐化學性良好 • 耐磨損性良好  
    
 • 泵件 • 孤立絕緣體 • 軸承 
用途 • 電氣部件 • 密封  
 • 電器用具 • 汽車領域的應用：  
外觀 • 棕褐色   
形式 • 可定制外形   
加工方法 • 機器加工 • 擠出  

物理性能 額定值單位制 測試方法
比重 1.97g/cm³ ASTM D792
吸水率 (24 hr) 0.0% ASTM D570
機械性能 額定值單位制 測試方法
抗張強度 (屈服) 11.7MPa ASTM D638
伸長率 (斷裂) 160% ASTM D638
摩擦系數 0.17 ASTM D1894
負載變形 (10 MPa) 1.40% ASTM D621
熱性能 額定值單位制 測試方法
線形膨脹系數 - 橫向 (26 到 93°C) 0.00012cm/cm/°C ASTM D696
導熱系數 0.25W/m/K ASTM C177
補充信息  
Temperature, Typical Range: -400° to 550°F  
Flammability, ASTM D635: non-flammable  
Maximum Pressure(P): 1000 psi  
Maximum Velocity with no load (V-SFM): 400 ft/min  
Maximum PV (PxV): 10000 psi x ft/min  
Shaft Hardness - Minimum: Rb25  
Shaft Finish recommended: 8 ot 16 Ra  
Shaft Material: All steels and aluminum  
Chemical Resistance: Inert  
Coef. of Friction, ASTM D1894, static & dynamic: 0.10 to 0.25  

備注
1 一般屬性：這些不能被視為規格。

1 / 1