亚洲国产精品第一区二区|人人人人澡|操大姨姐|免费视频久久看|欧美国产激情二区三区

 內容編輯

Teflon® PTFE 9B
聚四氟乙烯
DuPont Fluoropolymers

產品說明

Teflon PTFE 9B is a free-flowing white powder composed of premelted resin. It is designed for use in the ram extrusion process. Compared with other DuPont resins suitable for ram extrusion, Teflon® PTFE 9B provides outstanding resistance to charge fracture (poker-chipping) caused by excessive back-pressure during the extrusion of small-diameter rods, thin-wall tubing, and complicated profiles. Its uniform particle characteristics make it well suited for difficult feeding conditions.

Properly processed products made from neat Teflon® PTFE 9B provide the superior properties typical of the fluoropolymer resins: retention of properties after service at 260°C (500°F), useful properties at -240°C (-400°F), chemical inertness to nearly all industrial chemicals and solvents, and low friction and antistick surfaces. Dielectric properties are outstanding and stable with frequency and temperature.

In a flame situation, products of Teflon® PTFE 9B resist ignition and do not themselves promote flame spread. When ignited by flame from other sources, their contribution of heat is small and with very little smoke.

Statements, or data, regarding behavior in a flame situation are not intended to reflect hazards presented by this or any other material when under actual fire conditions.

總體

材料狀態 • 已商用：當前有效   
供貨地區 • 北美洲   
 • 低摩擦系數 • 耐化學性良好 • 煙釋放，低 
性能特點 • 抗溶解性 • 耐氣候影響性能良好  
   • 延展性，高 
 • 可切削 • 食品接觸的合規性  
    
用途 • 電器導線絕緣材料 • 密封 • 條材 
 • 管道 • 套管 • 軸承 
    
機構評級 • FDA 21 CFR 177.1550   
外觀 • 白色   
形式 • 粉狀   
加工方法 • 擠出 • 燒結  

物理性能 額定值單位制 測試方法
表觀密度 0.58g/cm³ ASTM D1895
熱性能 額定值單位制 
熔融溫度 327°C 
補充信息  
Average Particle Size, ASTM D4894: 550 µm  
Flow, ASTM D4894: 50 g/10 min  

備注
1 一般屬性：這些不能被視為規格。

1 / 1