亚洲国产精品第一区二区|人人人人澡|操大姨姐|免费视频久久看|欧美国产激情二区三区

 內容編輯

DeWAL D/W 200
聚四氟乙烯
DeWAL Industries

產品說明

D/W 200 is skived from a modified homopolymer PTFE resin containing a higher level of a fully fluorinated comonomer than is in our 220 film. The incorporation of the comonomer yields a material with improved electrical and physical properties. This film can be thermally bonded (fused) to itself (625 - 650 degrees F). The modified homopolymer resin exhibits chemical resistance equivalent to that of homopolymer PTFE. Its tensile strength is approximately 25% higher, and the elongation is approximately 60% higher than for homopolymer PTFE. Because of these properties D/W 200 is often a good substitute for melt Processable films such as PFA.

D/W 200 may be thermally fused to itself making possible the fabrication of structures requiring these properties. D/W 200 can also be used as a high dielectric strength fusible wrap in electrical and electronic cable applications. It can also be used as a bonding film in the circuit board industry.

總體

材料狀態 • 已商用：當前有效   
供貨地區 • 北美洲 • 歐洲  
性能特點 • 均聚物 • 良好的電氣性能 • 耐化學性良好 
用途 • 薄膜 • 電子電纜護套材料  
 • 電氣/電子應用領域 • 粘合  
    
形式 • 薄膜   

物理性能 額定值單位制 
Thickness 12.7 到 1570nm 
薄膜 額定值單位制 測試方法
抗張強度 - MD (屈服) 41.4MPa ASTM D882
伸長率 - MD (斷裂) 500% ASTM D882
熱性能 額定值單位制 
最高連續使用溫度 260°C 
電氣性能 額定值單位制 測試方法
介電強度 110kV/mm ASTM D149
補充信息 額定值單位制 
Backing Material PTFE Film 
Core ID 7.62cm 
Maximum Roll OD 356mm 
Width 25.4 到 914mm 

備注
1 一般屬性：這些不能被視為規格。

1 / 1