亚洲国产精品第一区二区|人人人人澡|操大姨姐|免费视频久久看|欧美国产激情二区三区

 內容編輯

Arlon® AD320
聚四氟乙烯
Arlon-MED

產品說明

Arlon's AD Series is a group of woven fiberglass-reinforced PTFE composite materials designed for use as printed circuit board substrates. These materials combine the excellent low loss electrical properties of PTFE resin with the enhanced value of costeffective heavier fiberglass styles to provide low cost laminate materials suitable for high volume commercial wireless communication applications.

The AD Series is currently available in a limited combination of dielectric thickness (0.015" - 0.062") and dielectric constant (2.5 - 3.5). Thicker dielectrics can be developed to meet customer requirements. The higher weight ratio of fiberglass to PTFE resin yields laminates with greater dimensional stability than is normally expected of PTFE-based substrates.

Stability of PTFE over a wide frequency range and low loss makes AD Series materials ideal for a variety of microwave and R/F applications in telecom industry. AD Series laminate materials may be processed with standard PTFE materials. Because there is a relatively higher percentage of fiberglass, thermal expansion is reduced in all directions, improving plated through hole reliability.

總體

材料狀態 • 已商用：當前有效  
供貨地區 • 北美洲 • 歐洲 • 亞太地區
填料/增強材料 • 玻璃纖維增強材料  
性能特點 • 尺寸穩定性良好 • 生產階段，快 
用途 • 電氣/電子應用領域 • 家電部件 
形式 • 顆粒料  
   
物理性能  額定值 單位制 測試方法
比重  2.40g/cm³ ASTM D792A
吸水率 (23°C, 24 hr)  0.070% ASTM D570
機械性能  額定值 單位制 測試方法
拉伸模量   ASTM D638
23°C 2  3560MPa 
23°C 3  4870MPa 
彎曲模量 (23°C)  3720MPa ASTM D790
壓縮模量  2520MPa ASTM D695
薄膜  額定值 單位制 測試方法
抗張強度   ASTM D882
MD: 屈服  144MPa 
TD: 屈服  119MPa 
剝離強度 4  -2.5kN/m Internal Method
熱性能  額定值 單位制 測試方法
導熱系數 (100°C)  0.24W/m/K ASTM C177
Coefficient of Linear Thermal Expansion   
X Axis: 0 到 100°C  0.000012cm/cm/°C Internal Method
Y Axis: 0 到 100°C  0.000015cm/cm/°C Internal Method
Z Axis: 0 到 100°C  0.000095cm/cm/°C 
電氣性能  額定值 單位制 測試方法
表面電阻率  4.5E+7ohm Internal Method
體積電阻率  1.2E+15ohm•cm Internal Method
介電常數 (23°C)  3.20 Internal Method
耗散因數 (10.0 GHz)  0.0038 Internal Method
耐電弧性  > 180sec ASTM D495
可燃性  額定值 單位制 測試方法
UL 阻燃等級  V-0 UL 94
補充信息  額定值 單位制 測試方法
Breakdown Voltage  > 45000V ASTM D149

1 / 2

 
 
 
 
 
 
Arlon® AD320 2012年9月29日
聚四氟乙烯
Arlon-MED
備注
1 一般屬性：這些不能被視為規格。

2 TD

3 MD

4 After Thermal Stress

2 / 2