亚洲国产精品第一区二区|人人人人澡|操大姨姐|免费视频久久看|欧美国产激情二区三区

ETFE 200

 

 

Tefzel 200
乙烯四氟乙烯共聚物
DuPont Fluoropolymers

產品說明

DuPont™ Tefzel ® fluoropolymer 200 is a generalpurpose resin available in translucent, 2.5-mm (0.1-in.) pellets. Compared to other grades of Tefzel ®, its most unique features are an intermediate flow rate and a balance of properties that make it suitable for a variety of processes and demanding end uses.

Tefzel ® 200 and the other Tefzel ® fluoropolymers are melt processible, modified copolymers of ethylene and tetrafluoroethylene. They are highperformance resins that can be processed at relatively high rates compared to fluorocarbon resins. They are mechanically tough and offer an excellent balance of properties.

Tefzel ® 200 can perform successfully in applications where other thermoplastics are lacking in mechanical toughness, broad thermal capability, ability to meet difficult environmental conditions, or limited by fabricating problems.

Properly processed products made from virgin Tefzel ® 200 are inert to most solvents and chemicals, hydrolytically stable and weather resistant. Recommended upper service temperature is 150°C (302°F); useful properties are retained at cryogenic ranges. The level and stability of dielectric properties are excellent and the flame rating is V-0 by the UL94 method. Mechanical properties include outstanding impact strength, cut-through and abrasion resistance. High energy radiation resistance meets IEEE 383 and the resin is approved for nuclear power plant use.

Statements, or data, regarding behavior in a flame situation are not intended to reflect hazards presented by this or any other material when under actual fire conditions.

總體

材料狀態 • 已商用：當前有效   
供貨地區 • 北美洲 • 歐洲  
 • 南美洲 • 亞太地區  
    
 • 抗輻射性 • 流動性中等 • 耐氣候影響性能良好 
性能特點 • 抗溶解性 • 耐化學性良好 • 韌性良好 
 • 抗撞擊性，良好 • 耐磨蝕性，良好 • 水解穩定 
 • 薄膜 • 管道 • 容器 
用途 • 電氣/電子應用領域 • 核能應用  
   • 實驗室器具 
 • 閥門/閥門部件 • 連接器  
    
機構評級 • IEEE 383   
外觀 • 半透明   
形式 • 顆粒料   
加工方法 • 吹塑成型 • 樹脂傳遞成型 • 注射成型 
 • 擠出 • 壓縮模塑  
    
    
物理性能  額定值單位制 測試方法 
比重  1.70g/cm³ ASTM D792 
熔流率 (297°C/5.0 kg)  7.0g/10 min ASTM D1238 
吸水率 (24 hr)  0.0070% ASTM D570 
機械性能  額定值單位制 測試方法 
抗張強度 (23°C)  44.8MPa ASTM D638 
伸長率 (斷裂, 23°C)  300% ASTM D638 
彎曲模量 (23°C)  1170MPa ASTM D790 
壓縮強度  37.9MPa ASTM D695 
沖擊性能  額定值單位制 測試方法 
懸壁梁缺口沖擊強度 (23°C)  無斷裂 ASTM D256 
硬度  額定值單位制 測試方法 
硬度計硬度 (邵氏 D)  67 ASTM D2240 
熱性能  額定值單位制 測試方法 
熔融溫度  255 到 280°C  
線形膨脹系數 - 流動 (0 到 100°C)  0.00013cm/cm/°C ASTM D696 
電氣性能  額定值單位制 測試方法 
體積電阻率  1.0E+17ohm•cm ASTM D257 
介電強度 (0.254 mm)  71kV/mm ASTM D149 
介電常數 (23°C, 1 MHz)  2.55 ASTM D150 
耗散因數 (23°C, 1 MHz)  0.0031 ASTM D150 
耐電弧性  122sec ASTM D495 
1 / 2    
  
   
   
  
   
 
Tefzel 200  2012年9月30日
乙烯四氟乙烯共聚物  
DuPont Fluoropolymers  
可燃性 額定值單位制 測試方法
極限氧指數 31% ASTM D2863
補充信息  
Limiting Oxygen Index, ASTM D2863: 30 to 32%  
Dielectric Constant, ASTM D1531, 1 MHz, 73°F: 2.5 to 2.6  
備注  
1 一般屬性：這些不能被視為規格。  


 

氟塑料,氟塑料價格,聚四氟乙烯,PVDF,PTFE,FEP,PFA,ETFE,PCTFE,聚偏氟乙烯,鐵氟龍噴涂,特氟龍噴涂